MISSISSIPPI TRUCK AND TRAILER

Phone: (309) 794-0708

702 31st Ave
ROCK ISLAND, IL 61201

Email: trailers@mistnt.com;keri@mistnt.com;jenni@mistnt.com

Dakota Bodies GEN II SBG9878VVSG2

Description

Dakota Bodies GEN II SBG9878VVSSG2 Service Body
Fits Trucks with a cab-to-axle (CA) of 56 inches with a single rear wheel axle.
| Body Dimensions: |
| ---------------- |
| 40 Inches - Compartment height |
| 14.25 Inches - Compartment depth |
| 49.25 Inches - Load space width |
| 24 Inches - Top of body to the top of the floor |
| 18 Inches - Horizontal compartment height |
| |
| Body Materials: |
| 16 gauge galvanneal. - Main body material |
| 14 gauge galvanneal - Compartment tops |
| 18 gauge galvanneal - Inner door panels |
| 18 gauge galvanneal - Outer door panels |
| - 5/16" Stainless Steel continuous rod - Door Hinge Rod. |
| - Stainless Steel - Door Hinge Sockets. |
| 16 gauge galvanneal - Wheel Panels - "Removable for ease of replacement" |
| 16 gauge galvanneal - Front bulkhead |
| 18 gauge galvanized - Shelving installed on Uni-Strut for infinate adjustment. |
| |
| Body Floor and Understructure: |
| 12 ga hot rolled treadplate - Floor |
| 5" Formed galvanneal steel channel frame |
| |
| Accessories: |
| - Single Point Compression T-Handle Latches - (PN# 31405) |
| - Gas cylinder type door holders on vertically hinged doors. |
| - Adjustable vinyl coated cable stops on horizontal compartment drop down doors. |
| - Polished Cast Aluminum fenderettes (PN# 31346) installed with wheel cut-outs, |
| - Aluminum combination fuel cup for Gas or Diesel & DEF (PN# 31407) |
| - Automotive bulb type weatherstripping mechanically fastened to door frame with rounded corners. |
| |
| Paint: |
| - Powder Coated "DB White" exterior and interior of body. |
| - Bumper and riser to be Powder Coated with "Black Lava" powder. |
| - Rubberized Protective Undercoating installed underbody |
| |
| Streetside Compartmentation |
| |
| "V" Style |
| |
| 1st Vertical: |
| 32" Wide x 40" High x 14.25" Deep |
| - Two (2) adjustable shelves each with divider slots on 2" centers installed on Uni-strut |
| |
| |
| Horizontal Compartment: |
| 43" Wide x 18" High x 14.25" Deep |
| - Open compartment. |
| - Notch out for "Pass Through" long storage to rear vertical. |
| |
| Rear Vertical: |
| 23" Wide x 40" High x 14.25" Deep |
| - One (1) adjustable shelf with divider slots on 2" centers installed on Uni-strut |
| each shelf will have two (2) adjustable dividers. |
| |
| Curbside Compartmentation |
| |
| "V" Style |
| |
| 1st Vertical: |
| 32" Wide x 40" High x 14.25" Deep |
| - Two (2) adjustable shelves each with divider slots on 2" centers installed on Uni-strut |
| each shelf will have two (2) adjustable dividers. |
| |
| Horizontal Compartment: |
| 43" Wide x 18" High x 14.25" Deep |
| - Open compartment. |
| - Notch out for "Pass Through" long storage to rear vertical. |
| |
| Rear Vertical: |
| 23" Wide x 40" High x 14.25" Deep |
| - One (1) adjustable shelf with divider slots on 2" centers installed on Uni-strut |
| each shelf will have two (2) adjustable dividers. |
| |
| Bumper: |
| - "Crash Zone" Style recessed rear bumper. |
| - Two (2) License plate lights installed in bumper - (PN# 31149) |
| - 2" receiver for vise mount on curbside. |
| |